When you first start using a new CBD vaporizer, you usually get good results. But after a few months, the quality of the vapor begins to decline significantly. This is due to poor maintenance of the vaporizer. By cleaning your vaporizer properly, you can prevent this common problem from ruining your experience.
In addition to ensuring better performance and taste, proper cleaning also extends the life of the device. Here are 4 steps to properly clean your CBD vaporizer.
Take apart the spray bottle
To effectively clean a CBD vaporizer, you must first carefully take it apart. Although these devices vary by model or brand, they generally have common parts, such as the mouthpiece, battery, heating chamber, etc.
By paying close attention to each of these parts, you'll be able to clean them properly. However, be sure to consult your steamer's manual for instructions on how to take it apart.
Empty each component of the spray bottle
After disassembling the appliance, you should empty each of its components. This will allow you to clean it quickly. To do this, simply shake and tap them to remove any debris inside. Next, use the cleaning brush to remove any other harmful particles. This brush is often included with your vaporizer when you purchase it. If you don’t have one, a cotton swab or pipe cleaner will work just fine.
Thoroughly clean the herb chamber and the mouthpiece
These are the two essential parts for your vaporizer to work properly, so you need to take good care of them. If the herb chamber has a filter, you should remove it and brush it clean. A clogged filter is a common cause of poor performance and bad taste.
Next, use a cotton swab or pipe cleaner along with 99% isopropyl alcohol to thoroughly clean the herb chamber and mouthpiece. The alcohol will help you remove not only stubborn stains but also any accumulated residue.
In addition, after this step, if any part of the spray bottle still has a stain or residue, you can soak it in alcohol for about 20 to 30 minutes.
Then rinse it with water and dry it with paper towels. However, we recommend that you consult the user manual for your vaporizer before doing so.
Clean and inspect the battery
As for the battery, you should take a cotton swab or a pipe cleaner and wet it before using it to clean the area where it connects to the tank. This task can be tricky, but it’s very effective and helps remove any dirt buildup in that area.
Once that’s done, you should inspect the battery. Before reassembling your CBD vaporizer, make sure there’s no residue on the battery. If there’s no buildup at the connection between the battery and the heating element, your vaporizer will work like new.
In short, to fully appreciate the flavor of each CBD flower, you need a spotlessly clean vaporizer. To clean it effectively, simply follow the four steps listed above. You can also use a PAX cleaning kit, which includes everything you need to clean your vaporizer.
Just be careful when cleaning your device and consult the user manual to avoid any accidents or potential damage! These products are available for purchase at our CBD shop.
